Thursday, November 23, 2006

Artist: Diane Foster
Bang, 2006
Digital inkjet and linocut

Artist: Rachael Rose
Blue Myrtle flow, 2006
Drypoint etching
constructed from 9 prints
(two shown - comprising 18 prints)

Artist: Rachael Rose
Garden of Good Intentions, 2005
Drypoint etching

Artist: Raymond Arnold
Goddess Gas - Paul Nash Corruption, 1998
Etching on 400gsm Arches paper

Artist: Milan Milojevic
Homage to Borges, 1998
Digital/Woodcut print

Artist: Fiona Lee
Iron II, 2002
from 'Bits of House' series

Artist: Melissa Smith
Journeying, 2005
Intaglio collagraph print
Unique state

Artist: Selwyn Stein
Molecules #4, 2006
Relief woodcut

Artist: Karen Lunn
Red Dress, 2001-2002
Etching and watercolour

Artist: Christine Scott
Shades of (Bolts), 2005

Artist: Kath Sinkora
Untitled 2004/4, 2004
Woodcut and etching

Artist: Melissa Smith
Collagraph print
Artists proof
Christine Scott: Hobart, Australia

When studying fine art at the Art School in 1997 my ambition was to become a graphic designer. Having really inspiring teachers across all disciplines encourged my desire to develop and apply various techniques to all methods of image making.

Learning and researching new developments in printmaking and the production of the print was very exciting for me. So I became a printmaker and still invest time in design projects whenever the opportunity arises. I enjoy the challenge of taking on that first idea given to me by the client and creating a concept then following it through to final presentation. And it keeps me on my toes and pays the bills.

Christine Scott, January 2006

Bale hook

Bale hook, 2005
3 Colour Photopolymer Plate
17 x 12cm

Print 1

Shades of (bolts) Version 2, 2005
Linocut, graphite
118 x 153cm

Green Mountain, 2006


9 panels, total size 91 x 216cm

Tuesday, November 21, 2006

Swan Engraving I 1982
Etching on paper
image: 1667 x 1285 mm
on paper, print

from Black Series II
[title not known] 1967
Lithograph on paper, print

Six Mile Bottom 1960
Metallic paint on canvas

Frank Stella born 1936
American abstract painter, born in Malden, Massachusetts, a suburb of Boston. Began to paint abstract pictures while at Phillips Academy, Andover. Studied history at Princeton University 1954-8, also attending painting courses there under William Seitz and Stephen Greene; influenced by Pollock and Kline, later by Newman and Johns. Moved to New York in 1958. In reaction against Abstract Expressionism, painted in 1958-60 a series of black pictures with the entire field covered with regular bands, followed in 1960 by an aluminum series, his first shaped canvases. First one-man exhibition at the Leo Castelli Gallery, New York, 1960. A friend of Andre and Judd and had considerable influence on the development of Minimal sculpture. Next made several series with more radically shaped formats and some with multi-colors. Painted 'Irregular Polygons' 1966-7, then 'Protractor' series with interlaced color bands and sometimes fan-like formats. His later work has included paintings with cut-out shapes in relief. Lives in New York.

Sunday, November 12, 2006

So you wanna know about an Etching Press?

If It's So Simple, Why Is It So Complicated?

How Intaglio Prints Get onto the Paper
Intaglio prints are impressed into paper by a design that consists of lines and textures that are cut or etched into a plate's surface. The plates may be of various materials like copper, steel, iron, various bronzes, zinc or plastics. Greasy printer's ink is wiped onto the plate. After the surface is carefully wiped, ink remains in the lines and tones of the plate. Great pressure is needed to make a print because the paper must be squeezed into the incised image.

To obtain satisfactory results application of pressure to the plate must be perfectly even in both dimensions. There are two basic methods by which this can be accomplished: 1/ a pair of flat plates which are squeezed together with great force or 2/ a flat plate squeezed between a pair of parallel, rotating rollers.

To squeeze a pair of flat plates together with enough uniform force to print an etching would require an extremely heavy-duty, relatively complex mechanical and/or hydraulic system. The resulting press would be heavy, cumbersome and expensive. There have been several attempts at this but none was practicable for intaglio printing. On the other hand, this approach is used to great effect for relief images because ink is printed from a raised surface onto relatively smooth paper, so the necessary pressure is much less.

It is much less complicated to use a supporting plate placed between a pair of rollers to generate the large pressures needed to force paper into the inked image. While forces sufficient for any particular plate, blanket and paper are bound to vary it has been estimated that etching presses should be able to exert about 1,500 pounds per inch of roller length. For example a 30 inch wide press should be able to withstand a total of 45,000 pounds (20,454.5 kg).

The Modern Intaglio Press
The modern intaglio press, therefore, need not be a complicated device. The main moving parts consist of a flat, steel plate placed between two revolving metal cylinders and a drive system which may be as simple as a hub and wheel or spokes and a frame on which to mount the parts. In order to make turning the cylinders easier, most all but the smallest modern presses use some sort of gearing or chain reduction system.

Most modern presses used high strength aluminum or hot and cold rolled steel alloys with a least 40,000 pound per square inch yield strength For frames flame cut steel plate (heavy and expensive), structural and "mild" steel is normally adequate if not used in high stress areas. Many older presses used cast iron frames which included the high-stress roller mechanism area. These frames were expensive to machine partly because the casting process uses sand and partly they were large, heavy and required large jigs, one for each side, and special tooling. Perhaps even worse is the fact that cast iron is not very strong and is brittle and therefore easily cracked or broken. Incidentally, If you have ever visited an iron foundry you would discover that it is a very dirty process.

Drive and Roller Bearings
Properly sized, sealed, self-aligning ball and roller bearings will run longer and require about 1% as much effort as plane, brass or bronze bushings. Ball and roller bearings are, though more expensive, definitely worth the added cost. Brass or bronze bushings are generally used for economy models and can reflect a cheapening of materials and sometimes workmanship. In either case it is vitally important that each bearing have a grease fitting. Drive shaft bearings are usually 3/4 to 1 3/8 inch. The self-aligning bearings used for the rollers should be around 1/3 the diameter of the roller for a very long, trouble free life, printing at the heaviest pressures. Many presses use smaller sizes which can break down when printing editions of larger photogravures or deeply etched plates using harder papers.

For long lasting, smooth, easy operation all rotating parts should be mounted in self-aligning ball or roller bearings. These bearings should be oversized. It costs very little extra to use the next larger size and the gains in performance and durability are great.

The Bed
Because a substantial portion of the weight of an etching press is the bed many have tried lighter alternatives to steel such as various wood based materials like highly compressed wood fiber, fiberglass or phenolic resin fiber/paper substances. Until now no substitute has proved adequate because they warped or broke down too quickly.

The steel bed, which also provides additional stiffness, may be either hot or cold rolled steel that must be properly heat treated to relieve internal stresses prior to a final grinding process that assures a high degree of parallelism. The finished thickness for a small press about 18 by 24 inches should be no less than 7/8 inch, 1 1/8 inch for a 24 by 36 inch press and no less than 1 1/4 inch for a 30 by 50 inch bed. Bed length and width is determined by the largest size paper you will use. It should be about 6 to 12 inches longer and about 2 inches wider. The felt blankets may be as long as the bed and about 1/2 inch narrower. Experience has demonstrated that these dimensions are adequate, with proper care, to produce a long wearing press bed which can be reground when necessary. Some very old presses used machined, cast- iron beds. They were usually rather thick and were manufactured with hollows for weight savings. Additional life may be obtained by periodically turning the bed over.

The Rollers
Many presses use steel for both upper and lower rollers. Rollers may be hollow or solid and, depending on the design, the diameter should be no less than about 1/4 to 1/3 the width of the bed if the roller is hollow. The roller wall should be about 5/8 to 1 inch thick. The diameter of solid rollers should be no less than about a 1/4 the width of the bed. Both upper and lower roller must be precision machined for true, concentric rotation. The upper roller should be made of steel, though aluminum with a 3/8 inch coating of 90 to 100 durometer rubber has been used successfully. The lower roller may be of any durable, stiff metal. Most etching presse manufacturers use steel. Many older presses used rather large diameter lower rollers which reduced bed distortion. Most modern presses, however use considerably smaller diameter steel that will cold work the bed far more rapidly.

The use of high grade, aircraft aluminum for the lower roller eliminates almost all bed distortion or the need to turn the bed over. Fifteen to 30 times the number of printing cycles can be expected when compared to a similarly sized steel lower roller. Some press manufacturers have machined their light-weight rollers with a slight crown in an attempt to compensate for bending. The problem with this approach is that the amount of crown will properly compensate only at one setting. Because print makers use various weight papers, thickness of blankets and plates the settings and the forces are not always the same which modify the amount the roller will bend and may result in uneven pressure on the plate.

Your Average Printmaker
Because the average print maker is not equipped with devices to measure minute deflections, there is no way predict what setting will exactly compensate for the roller's crown. Proper profiling of a rotating part is an expensive process and unnecessary in this application when the roller is adequately sized to begin with.

The Drive System
Drive systems must be robust and should be engineered so that the least expensive, easiest to repair part fails first. It is far cheaper to replace a chain or link, for example, than a gearbox or drive shaft.

The Frame
Most modern presses are of welded or bolted steel construction and should be checked for bent parts. Occasionally presses have been dropped during transport or installation. If the frame or other parts are made of cast iron inspect carefully for cracks or suspicious welds. Legs and feet are particularly vulnerable.

Spare Parts
Spare parts should be cheap as well as easy to find and replace.

The importance of proper alignment at installation cannot be overemphasized. When the rollers are not parallel from end to end twisting forces are exerted on the bed and sooner or later it will distort. Normally it is sufficient to level the press, particularly from end to end. A straight bar and a spirit level placed in turn across each end of the press can be used to observe if the frame is twisted. Normally this procedure insures roller parallelism. The bed should rock end to end only minimally, if at all. A visual inspection for twist must be made. If the press can be rocked side to side or diagonally it is not square! This problem MUST be corrected before operation under pressure; otherwise you can be sure that the bed will become twisted and eventually useless. This assumes that the idler wheels have been adjusted as best as you can. Use common sense.

Care and maintenance
Etching presses are happy enough to get a minimal attention such as an occasional wiping with a bit of mineral spirits, grease in the bearings. Chains should be oiled and occasionally tightened. Etching presses are not high tech devises but they can rust or corrode. Occasionally you will find presses with stainless or chrome plated parts such as rollers. But most will appreciate being coated with oil and covered with a plastic dust cover if left unused for more than a week or two. While others may disagree it has been found that wiping with an oily rag and using a thin coat of oil UNDER the bed will prevent the lower roller and bed from becoming, especially in damp climates, corroded or oxidized. This procedure does not interfere with the operation of the press.

Permit us a few questions, maestro...

Is it fair to say that, all else being equal, a heavier press is a better press?
No it is not. Quality, performance and being "better" does not translate into mass. A heavier press does not in any way translate to a higher quality press. It may that the designer's lack of understanding of basic mechanical principals, materials and structural engineering required him to specify unneeded material in the mistaken belief that "more is better." Since an etching press was not meant to fly it is often wise to specify a larger ball bearing or wall thickness rather than suffer a smaller element which is apt to break. The next size larger bearing, for example, may be only a few pounds heavier but provide far greater durability.

A simple, logically designed structure and strategic use of high quality aluminum, one third the weight of steel, can result in great weight saving. From the small manufacturer's point it is less expensive to spend a bit more on the machine rather than service a warranty somewhere on the other side of the world! Strength and rigidity are related to materials used and structural design.

This is the 30x52" Elephant Etching Press.

Modesty aside, the 30 x 52-inch Elephant Etching Press (which I designed) weighs about 1,200 pounds (545.5 kg). Similar sized press of other brands weigh around 2,400 pounds (1,091.0 kg). The Elephant uses a solid aluminum lower (drive roller) and a hollow 8-inch steel upper roller with a 1-inch wall. Both are supported by 2 15/16-inch self aligning ball bearings. Printing forces are supported by take-up units, not the press frame.

This permits the use of a light weight frame which need only carry the weight of the press bed, about 550 pounds (250.0 kg) carried across at least four idler wheels and the lower roller, and the forces exerted by the drive system. This is far less than the up-to 45,000-pound (20,454.6 kg) printing forces exerted by the rollers. Most conventional presses do not use the same type of take up unit construction as, for example, the Elephant. Those designs depend on the strength frame to resist the printing forces and, therefore, must be considerably heavier. The Elephant press uses a welded steel base to carry the printing section and leveling screws for final alignment.

Where "Brand X" Press Manufacturers Cut Corners
Many other manufacturers tend to use very heavy framework and side frames. These presses are expensive to ship and install and the extra weight does not influence the quality of the print. Many etching presses on the market today were not actually engineered. Rather, they were copied or drawn up by a machinist who though little or nothing other than that "heavier is better." Many of these presses develop warped beds because no thought was put into the materials used. High-grade, alloy 6060-T6 aluminum with a yield strength of about 45,000 pounds per square inch, for example is stronger than "mild steel" that gives at about 20,000 to 30,000 pounds per square inch.

The structure of inferior press rollers is less substantial, being made of a through shaft and end plates welded into position then machined. The wall thickness of the these press rollers is usually around 5/8 inch. The roller journals and bearings on these presses tend to be relatively small and can crack in the weld areas because they are not properly sized or heat treated.

Cast Iron Is for Lawn Benches and Manhole Covers
Some presses use cast-iron frames. Cast iron is brittle and, on average, has about one half the strength of most steels (cold rolled, hot rolled, cast, forged). Therefore, the cast iron should be, on average, about twice the weight of steel to withstand the same loads.

Cast iron, also, is weaker in tension than compression. Another weight saving in the design of all my press designs is the use of alloy 6060-T6 aluminum for the lower rollers rather than steel. They are solid because it is less expensive to machine a roller from a solid piece than build one from components. When properly sized they provide sufficient resistance to bending and they allow many, many more operations without bed distortion. The reason for this is that aluminum is more resilient than steel and reduces local contact pressures by a factor of about 27 according to the roller equations.

This works something like a rubber tire. Can you imagine what the roads would look like if we used steel tire on cement roads? The resilience of the tire spreads the load over a considerably larger area.

Prices? What's the minimum price you have to pay for a good, solid, mid-sized press?
Say $6,300 for a 24 by 48-inch press. An 18 by 36-inch press should run about $4,500. The press should have decent-sized sealed self-aligning ball bearings throughout, a reduction drive system, steel bed and microgauges.

What about accessories for the press?
A 1/4 inch Lexan sheet to cover an engineer's drafting grid makes it easy to position plates accurately. Microgauges are also quite nice, though, to be perfectly honest, anyone who can count and keep notes can save a few pennies. They do look nice and I use them. You can also make a "blanket holder" which holds the blankets for you while printing. Woven felt blankets will last longest. The sizing catcher can be washed. It is my humble opinion that, unless you are printing colographs or very deeply bitten images, one can dispense with the 1/4- inch blanket. The fewer and thinner the greater the pinch pressure. Thicker blankets will spread the same forces over a larger area thus reducing local pressure. (See the above rubber tire example.) If you try to print with too many blankets it would be like running your car with soft tires which requires more effort from the engine.

What about buying a used press, are there "tests" for checking out the roundness of its cylinders, etc.?
Yes. First you should inspect for general condition, gouges, dents, deposits of rust on top and bottom of the bed and both rollers. Most minor defects can be neglected. If more than about a 1/32 of an inch distortion near the center of the upper roller the press can be disassembled and offending parts re-machined. The lower roller does not have to be so pretty. You should inspect the bed for distortion. You can use a steel straight edge and level. A slight bow is acceptable but a twist is a no-no and indicates that the press was not properly leveled and/or the rollers are not parallel and could indicate uneven bearing wear.

A slight bow may be corrected by flipping the bed over so that it gradually bends in the opposite direction. To the best of my knowledge the only cure for a twisted bed is, if no more than about a 1/16 inch, is to take it to be reground otherwise it might be cheaper to buy a new one. Adjust the press so that upper roller just barely contacts the bed. Making certain there in nothing on the bed shine a light from behind the roller and observe the line of contact for obvious irregularities as you run the bed through the rollers. Remember, however, that nothing is perfect.

Then you can make a test surface print without blankets. Coat a large litho plate evenly with ink. When making the trial print adjust the press so that upper roller just barely skims over the bed. Without a blanket there may be some uneven areas. Totally blank areas indicate flat spots on the roller or a depression in the bed. You might want to make this test with a sizing catcher and 1/8 inch felt blanket. If you really want to get a good fix on trueness of the cylinders you can buy a dial indicator with a stand or, better still, pay a local machinist to check it. If the bed is warped you will be able to check roundness at only in one place at a time.

Summing Up
The ideal intaglio press should be able to reliably exert forces to satisfactorily produce the largest print you intend to make. It's design should be gimmick free and incorporate the fewest parts possible to satisfactorily fulfill its function. It should be safe, easy to operate, run smoothly, be easy to maintain and remain trouble free when used normally. It should be able to accommodate other media such as lithographic plates or wood blocks without special parts or structural modification.

It should not be excessively heavy. Intelligent, untrained personnel should be able to install and align presses of less than about 30 by 50 inches with appropriate equipment. Be sure that larger presses can be fit through doorways, passageways or into elevators safely without exceeding the building's load capacities! Presses that can be broken down into two basic parts (a base and printing section containing the rollers, bed and drive) are easier to maneuver.

Presses that are designed as a single unit must usually be taken apart and reassembled by knowledgeable personnel. It is necessary to use professional help to install very large or heavy presses. Because of liability and safety concerns powered etching presses are not commonly manufactured.

Thursday, November 09, 2006

Burlesque of North America is based out of Minneapolis, Minnesota. Collectively, Burlesque Design has dozens of fine art shows under their belts. Add in public displays with street art of varying degrees of legality, along with their more recent forays into the realm of the art/rock poster, and odds are you’ve seen their work. This March, it’s all getting pulled together for a massive blowout at OX-OP that will include all aspects of this guerrilla unit's efforts.

Burlesque Design of North America, a Minneapolis-based design collective, has, in the past couple of years, spread its sluggers around the country. On the West Coast roster, you can find Todd Bratrud, of Consolidated Skateboards fame; Mike Davis, aka Mike the 2600 King, creator of Twelve Car Pileup; Aaron Horkey, precision illustrator for RVCA Clothing, Iota and Consolidated Skateboards, Black Osprey Designs and others; and the most recent California trade, George R. Thompson IV, another RVCA team-starter, formerly at Fobia Skateboards. Back in the Midwest, original team players Wes Winship, LifeSucksDie alum and Auxiliary Printing guru, and Skye Rossi of the Rhymesayers Entertainment camp are always on deck.

Tuesday, November 07, 2006

Jose Manuel Pina

Alhambra Pergamino
Technique: etching, aquatint, additives
Size: 25X50 cm.
Paper: Vendrell
Date: 2000
Edition: 125

Hao Ping
Dragon Dance
Media: Color woodcut
Image size: 60 x 60 cm.

Roderic Stokes

Through the Looking Glass

Embossed print
Image size: 25x30 cm.
Paper: Hahnemühle 350 gr.
Edition: 50
Year: 1999

Friday, November 03, 2006

Two Metal Plates etched with the Metal Salt Etching technique. I used acrylic paint as the resist for these plates. Both plates are experiments on the acidity of the bath.

Wednesday, November 01, 2006



  1. Shellac (Bull’s Eye Orange works best)
  2. Xerox or Laser Print
  3. Oil based Lithography Inks
  4. Roller or Brayer
  5. Newsprint
  6. Gum Arabic
  7. Sponges
  8. One empty bowl
  9. One bowl with clear water and a tsp. of gum arabic

This process uses your Xerox or laser print as a printing plate. You usually get only one or two quality prints out of each Copy. It is a good idea to have MANY copies with you when you begin printing. Your Copy must be toner based (heat set) and not inkjet or any other water-based type.

Prepare your ink and roll out on slab. A small amount of setswell or varnish may be needed to loosen the ink. Keep the ink on the slab lean to help avoid scumming of your plate.

  1. Shellac the back of the Xerox or Laser Print. This can be done ahead of time.
  2. Spread a thin layer of gum arabic onto the glass slab to hold the copy in place.
  3. Place the Copy face up on the slab.
  4. Spread a thin layer of gum over the face of the copy.
  5. With fresh water on sponge wipe excess gum from Copy.
  6. Roll up the Copy with ink as if a lithographic stone or plate.
  7. Wipe the Copy with the damp sponge.
  8. Ink again.
  9. Repeat until inked to your liking.
  10. Place your good paper on clean plate and place inked Copy face down onto paper.
  11. Cover with newsprint and then with blanket(s).
  12. PRINT!
New Etching Technique learned today, from Friedhard Kiekeben.

Issn 0960 9253

Perfect Chemistry

Etching: Friedhard Kiekeben gets to grips with the science of non-toxic intaglio printmaking and explains his own pioneering discoveries

Nowadays, it seems, we are reassured by the ‘science bit’ in marketing. Any product is expected to have the seal of approval from a man in a white lab coat; from shampoo to yogurt drink. Generally the item in question is not going to do us any harm, but the science is reassuring. It is ironic that we seem less stringent about genuinely harmful materials because we’ve been using them for years ‘without any ill effects’.

In all likelihood I would have used bucketfuls of nitric and solvents over the last 11 years, in my practice as an artist, if I hadn’t thought more about the science bit. I suppose I must have absorbed my dad’s interest in chemistry (he was a science teacher in Frankfurt) and this combined with a natural curiosity about the stuff of printmaking:
Was there an alternative to acids? What do you get when you cross a lemon and iron chloride? Can you etch with salt?

It wasn’t so much that I wanted to meddle with the history of printmaking, just some of the ingredients. We are preoccupied by healthy living and I wanted to apply similar principles to healthy working. Meeting printmakers like Keith Howard and Robert Adam who were already developing ideas and practice in line with safer printmaking, galvanized my own experiments.

A lot of my methods are well documented and widely used. However, as with all processes they are – quite rightly - open to questioning. As my complete system of Metal Salt Etching would feature in Keith Howard’s The Contemporary Printmaker (2003) I wanted it to be tested by two leading experts in environmental chemistry. I have always taken advice from scientists, but here was an opportunity to confirm the many benefits offered by this new approach to etching: And here comes the Science bit…

Metal salt etching comprises two kinds of process for the entire spectrum of metals suitable for intaglio printmaking and etched sculpture. The Edinburgh Etch contains the reddish ferric chloride and it etches the warm colored metals; copper and brass. The Saline Sulphate Etch, based on copper sulphate, etches the silvery metals; zinc, mild steel, and aluminum. Both these salts have been used for centuries but what had been overlooked is that their potential for etching is not fully harnessed when used without a catalyst. In fact, I would argue that this knowledge remained unexplored because metal salts were judged as if they were acids. But metal salts do not corrode metal through the destructive and harmful processes that typify acid etching: by contrast they owe their etching properties to electrical attraction in which atoms of the metal plate are elegantly removed by the metal compounds that are dissolved in a salt solution.

Today we know that this is an electrical kind of chemistry which is more akin to the workings of a battery than to the corrosive action of strong acids. Think of the rabbit in the Duracell ad: a battery on a full charge will give plenty of electrical energy while a weak or depleted one will soon stop moving an electric toy rabbit. The difference lies in the strength of the electrical charge: the rabbit with the biggest charge wins.

In 1997 I invented the ‘catalyzed’ version of ferric chloride, The Edinburgh Etch, in which a small addition of citric acid literally dissolves the sedimentation of the iron salt; thus creating a much more potent, yet safe, mordant. This process has since been adopted throughout the printmaking world and etchers have likened its crisp biting characteristics on copper to Rembrandt’s (toxic) Dutch Mordant.
Now many printmakers know what lemons and iron chloride can do together.

Soon after I published this research in Printmaking Today the electro etching expert, Cedric Green, noted that The Edinburgh Etch is ideal for etching copper but that a solution based on copper sulphate, The Bordaux Etch, should be used for a safe zinc etch. Intrigued by Cedric’s ideas I introduced copper sulphate into my own research program. Trials showed that a straight copper sulphate solution makes a good mordant for zinc (but not for aluminum) but consumes a large amount of copper sulphate crystals.

I realized that once again the right catalyst would accelerate and improve the efficiency of the etching process. As before I systematically introduced different ingredients to the process and monitored their effects, quantities and by-products. I had a pretty good idea that due to its conductive effect in water, simple cooking salt (sodium chloride) might be the key ingredient. Most of my time was spent researching the perfect ratio of salt to sulphate. The addition of an exactly equal quantity of salt to copper sulphate dramatically increases the speed, quality and longevity of this new etching solution: The Saline Sulphate Etch.

This solution now provides a universal etching bath for all three silvery metals: Zinc, Aluminum and Mild Steel, and will no doubt become an extremely useful method in the repertoire of printmaking. The Innovative Printmaking students at UCC Chester can’t get enough of The Saline Sulphate Etch and use it on a daily basis, and in my own work it enabled me to etch the large scale aluminum sculpture ‘Shatter-Ice’ shown here. For anyone who loves the physicality of etching it is such an exciting and satisfying process to use.

A recent conference on non-toxic printmaking in Barcelona brought an opportunity to meet Cedric Green, father of The Bordeaux Etch, who wholeheartedly approves of the latest addition to the metal salt method. During the same event Eva Figueras presented evidence that Goya already etched zinc in copper sulphate. Unfortunately for printmaking, metal salt etching, for a number of historical and technical reasons, did not become mainstream practice until today.

In 2003 I presented my complete research on the Metal Salt Etching system to the chemistry professors Dr Paul Craig and and Dr Paul Rosenberg at the Rochester Institute of Technology, New York, for final testing and assessment. Dr Craig took an empirical approach and together we etched plates under laboratory conditions, making sure all relevant data such as plate size, etching times, mordant strength etc were faithfully recorded. Dr Rosenberg never needed to visit the print studio. He took an analytical approach in which all variables and by-products of the chemical reactions were determined through chemical formula and calculations. The results of both strands of investigation were then formulated into a safety assessment for Metal Salt Etching which is published in The Contemporary Printmaker but can also be found on my research web site: ><

The assessment states that: ‘In the past metal etching for the purpose of printing or art was typically done with nitric acid, which has harmful vapors and is extremely caustic...The Edinburgh Etch adds one new ingredient to the etching bath: citric acid. much more rapid and reproducible than the original ferric chloride etch...The Cu2 will have a tendency to form a complex with citric acid…increasing its solubility. The hazards associated with the Edinburgh Etch are dramatically less than those associated with nitric acid. In fact it could be safely used in an open studio or laboratory.
The Saline Sulphate Etch is recommended for etching aluminum or zinc (or mild steel). In the absence of sodium chloride, a copper etch of zinc is characterised by high levels of insoluble hydroxides...which may clog the etching process, for reasons like those proposed previously for the Edinburgh Etch.

For the printer or artist both these systems are mild and much safer than the traditional nitric acid bath for etching of metals, especially if proper precautions are taken (i.e. no etching of aluminum with ferric chloride) and when exhausted materials are disposed of properly. To the chemist, these are very nice systems, which are highly complex...There is not much published information on these systems…All would bear some study from the chemical perspective…There does not appear to be any significant or major chemical hazards associated with the chemical processes employed here, although a reaction between aluminum and iron (chloride) could lead to explosive results.’

The reaction diagrams provided by Dr Craig and Dr Rosenberg clearly show how the new metal salt solutions increase the electrical voltage that is present in a pure ferric chloride or copper sulphate bath. The simple addition of measured quantities of crystalline lemon juice (citric acid) and cooking salt (sodium chloride) respectively, produces an etching environment safer and more effective than the traditional nitric bath – ‘and that’s the science’.


Metal Salt Etching: Basic Recipes

Saline Sulphate Etch
To etch zinc, aluminum, mild steel

Mix 100g copper sulphate crystals
with 100g cooking salt
dissolve in 1 litre of warm water

Edinburgh Etch
To etch copper or brass

Dissolve 250ml of citric acid crystals
In 1litre of warm water
Mix with
4 litres of saturated ferric chloride solution
(strength about 40%, or 42-48 BE)

(multiply or reduce amounts while retaining correct ratios)